Comcast Business teamed up with the Center for Digital Education (CDE) to perform a survey to understand the role of high-performance networks in K-12 schools. The results of the research show that high-performance networks are crucial for K-12 schools and now’s the time to modernize network foundations. Here are six steps that can help districts turn their goals into reality.
Step 1: Set concrete goals.
School officials should first delineate the plans for digital learning, including the types and numbers of devices, services and applications that require network support. For example, learning management systems should be included in such an assessment.
Step 2: Determine how much network capacity will be required to support the applications.
An accurate forecast is important for two reasons. First, it will ensure individual schools can maintain reliable performance even as more devices come online. Second, schools will better support a growing number of Internet-enabled activities. For example, important external resources range from recorded news coverage of pivotal events studied in a history class to videoconferences that enable students learning Cantonese to converse with peers in Hong Kong.
Unfortunately, many school officials don’t know how to accurately determine their needs. Are 10 megabit per second (Mbps) Internet services – a common rate for home broadband customers – enough? Or should schools opt for increments closer to 1 gigabit per second (Gbps) services to accommodate current and future demand?
Officials can begin to answer these questions by first gathering statistics about current network utilization rates to determine how close today’s loads are coming to maxing out capacity. Standalone meters or dashboards available from network service providers can provide a school with these statistics.
Also consider recommendations from outside sources, such as the State Educational Technology Directors Association (SETDA), a nonprofit organization that publishes guidelines for minimum broadband resources for K-12 institutions. Current recommendations call for at least 100 Mbps per 1,000 users for external connections to Internet service providers. However, SETDA is also advising school officials to prepare for 1 Gbps connections by the 2017-2018 academic year. The guidelines for internal wide area network (WAN) communications between district offices and schools and among schools within the district call for even higher rates: 1 Gbps per 1,000 users today, and 10 Gbps by 2017.
“We do our planning by looking at historical information and using the guidelines we get from the state and SETDA,” Digiovanni says. “A big driver for us now is the state’s Georgia Milestones assessments. As students go online we’ll watch to see how our network runs, as well as our utilization rates. Based on that we can plan for where we’ll need higher capacity, new equipment and other enhancements.”
Some networking experts suggest schools upgrading from outdated services subscribe to 100 Mbps services going to each school. IT managers can review monthly usage statistics to determine if that capacity is overkill for their needs, or conversely, nearing overload levels. District officials can then make any necessary adjustments. Similarly, usage reports gathered over time will identify annual trends and help school administrators understand if they’ll have sufficient capacity if a major initiative, such as rolling out Wi-Fi to all students, is on the near-term roadmap.
Step 3: Choose appropriate broadband technology.
After quantifying capacity needs, school districts should evaluate which networking services will serve their requirements in the years ahead. Traditional time-division multiplexing (TDM), the networking technology that underpins commonly deployed T1 and T3 lines, may still satisfy current requirements at many K-12 schools. But some industry experts say it’s difficult to add capacity to these foundations when demand increases quickly. For applications that require the highest performance levels, an all-fiber network for the local area network (LAN) and WAN may be the best choice. A fiber-optic network backbone balances high-performance, scalability and economical needs. Scaling is simple with fiber – schools can simply contact their service providers to adjust their contracts if demand increases and they need to upgrade from initial 100 Mbps services. Schools can buy what they need when they need it and can scale up in any increment when they need additional capacity.
If fiber is not available, other options include a coaxial cable running from the fiber backbone or digital subscriber line (DSL), which runs data over copper telephone wires. Proponents say DSL offers Internet service at lower prices than fiber or fiber/coax networks. However, DSL performance may be lacking in some cases due to old infrastructure (copper wires) or distance from the central office.
In addition to picking the right broadband technology, IT managers should fully vet potential service providers. Develop a short list of candidates based on contenders that balance years of experience in the market with a track record for reliability and the ability to meet the tight budget constraints of schools. Then contact references in other districts for their insights and experience with those service providers.
Step 4: Plan with reliability in mind.
To guard against service downtime, officials at Marietta City Schools contract with two broadband providers and divide traffic across the two services. “We wanted vendors with different network paths so we wouldn’t be affected by an outage caused by someone digging into a network link or a utility pole getting knocked down,” Digiovanni explains. If disruptions like that happen and one company’s service goes dark, the second network temporarily supports the district with the remaining capacity. This strategy won’t maintain normal performance levels, but schools that use this approach will still be able to function until the outage is repaired. When not in recovery mode, the dual resources keep traffic flowing smoothly with the help of a network load balancer. The technology constantly monitors the utilization levels across both network streams and directs traffic to keep volumes roughly equal. This ensures one of the communications links doesn’t become overloaded if, for example, an online assessment suddenly puts new strains on the service.
Another option for maintaining reliability is to sign separate contracts with a primary and a secondary service provider. If for any reason the main network fails, traffic automatically gets routed to the backup resource. One thing to note is that while businesses are used to backing up their data, this may not be a routine procedure for all schools. With all of the data a school creates – including test data, grades, e-mails, surveillance video, etc. – education personnel must be vigilant in backing up data, either on-site or in a third-party, off-site data center.
Whether schools choose to use two primary services or go with a primary/backup approach, success hinges on finding providers with networks in diverse geographical areas. This decreases the chance they’ll both be disrupted by the same event. Ask for a map of each provider’s backbone and network spurs to make sure the services are separated sufficiently. Also make sure both service providers are not telecommunications companies, which often buy from each other and are co-located in the same office and lease the same regional fiber routes. Using a cable company as the primary provider and a telecommunications company as the secondary provider (or vice versa) ensures backup is sound.
Success also requires negotiating favorable service level agreements (SLA). Every SLA will promise high levels of uptime; the trick is knowing exactly what to expect if problems occur. For example, some service providers maintain their own network infrastructure, while others lease capacity from a prime network operator and then sell services to customers. Companies that install and manage their own infrastructure have more control over the resource and thus may be in a better position to address performance problems. By contrast, a subcontractor will have to contact the prime network operator if a school’s service is degraded, which may lead to delays.
District officials should also discuss the finer points of SLAs with providers before they sign a contract. In particular, get details about time-to-repair guarantees. For example, if the contract specifies a four-hour response time, does that mean the network will be back to full operation within that period or that a service ticket will be opened and the school will be notified of the status in that timeframe?
Finally, SLAs should specify how often the service provider will meet with the school to review utilization rates. Typically, these joint analyses occur monthly or quarterly to make sure districts aren’t over- or under-subscribed, and if either problem is apparent, that the proper adjustments are made.
Step 5: Take advantage of available funding.
E-rate funding is a particular benefit to schools with high percentages of students in the National School Lunch Program, which provides free and reduced lunch based on income. But these institutions or wealthier districts may have funding gaps that require administrators and IT managers to present proposals to voters for new investments in networking technology. In these cases, school officials must offer a clear picture of what digital capabilities are needed, how they’ll be used and what will be the likely return on investment.
Some districts are also taking advantage of local initiatives, such as the special purpose local option sales tax, or SPLOST, in Marietta. Revenues from the tax provide some technology funding for Marietta City Schools. “Locally, people are very supportive when we show them why we need to spend the money,” Digiovanni says. The challenge for IT administrators is to demonstrate the benefits of contracts for the highest-performance network services won’t be fully realized if the district runs on outdated routers, switches and related networking gear.
To bolster E-rate funds and a combination of local and federal grants, financially prudent school districts should create contingency funds to help cover ongoing modernization projects. The technology assessments and resulting IT roadmaps developed in the first steps of the networking strategy will help planners determine how much money to set aside each year.
Step 6: Communicate early and often with end users.
IT managers must keep instructors and administrators informed about upgrade schedules and any possible disruption in network services. “If you know there will be an impact to their daily routine, make people aware there will be a slowdown in performance,” Digiovanni says. “If they’re aware of that they’ll be more apt to forgive you than if something just happens without any warning.”
A clear idea of networking requirements and a comprehensive plan for delivering adequate service levels will help school districts thrive in the digital age. This will help IT managers stage modernization activities as a series of manageable steps rather than undergo a single and potentially disruptive overhaul project.
Although he’s developed a formal, multiyear modernization strategy and documented the business case for a high-performance network, Digiovanni says the benefits of network modernization boil down to one simple metric. “I sleep better at night (because of the increased capacity),” he says. “Prior to doing the upgrades we were a 9-to-5 shop. But I soon realized we just couldn’t continue to do business that way, because that’s not how the world works,” he adds. “We wanted to run a 24/7 facility where students, teachers and administrators can access resources when they’re at home, at any time of the day and on weekends. We have put ourselves in a really good position now to accommodate those needs.”
Comcast Business teamed up with the Center for Digital Education (CDE) to perform a survey to understand the role of high-performance networks in K-12 schools. The results of the research show that high-performance networks are crucial for K-12 schools and now’s the time to modernize network foundations.
Click on the button below to get accessUnlock Now
Or sign in to access all content on Comcast Business Community